Tapo C200 重 置

設定指南

更新03-23-2020 09:09:41 AM

這篇文章適用於: 

TC65 , Tapo C110 , Tapo C320WS , Tapo C100 , TC60 , Tapo C210 , Tapo C200 , TC70 , Tapo C310

有兩種方法可以將Tapo攝影機重置為其預設值。

方法1：使用RESET按鈕

Tapo C200

開啟攝影機後，將攝影機鏡頭往上推，然後按住RESET按鈕至少5秒鐘，直到LED閃爍紅色。 相機將重置並重新啟動。

Tapo C100

開啟攝影機後，長壓RESET按鈕至少5秒鐘，直到LED閃爍紅色。 相機將重置並重新啟動。

方法2：通過Tapo APP刪除攝影機

選項1  在Tapo 首頁

在Tapo首頁中長按您的攝影機，接著點選下方的移除來將攝影機從您的TP-Link帳號移除，並重置為原廠預設值。

選項2

1. 在首頁中點選您的攝影機，或點選上方的攝影機>預覽攝影機>管理，來進入實況頁面。

2. 在““直播(實況)”頁面點選齒輪圖示來進入"攝影機設定"頁面。

3. 點選移除攝影機來將它從您的TP-Link帳號移除，並重置為原廠預設值。

注：只有當攝影機機在線上時，您才能透過Tapo Camera APP將其重置。

What’s your concern with this article?

• Dissatisfied with product
• Too Complicated
• Confusing Title
• Does not apply to me
• Too Vague
• 其他

謝謝

感謝您的反饋。
點擊此處與TP-Link技術支持聯繫。

Setup Videos

來自 Australia?

取得您的地區產品、活動和服務。

TC60, TC65, TC70, Tapo C100, Tapo C110, Tapo C200, Tapo C210, Tapo C310, Tapo C320WS

01-02-2020 219,777

There are two methods to reset the Tapo camera to its default settings.

Method 1: Use the RESET button

Type 1: For Security Camera

While the camera is powered on, press and hold the Reset button for at least 5 seconds until the LED blinks red. The camera will reset and reboot.

Type 2: For Pan&Tilt Security Camera

While the camera is powered on, tilt the camera lens up, then press and hold the RESET button for at least 5 seconds until the LED blinks red. The camera will reset and reboot.

Type 3: For Outdoor Security Camera

1. Loosen the screws on the back panel and remove the cover.

2. Press and hold the Reset button for at least 5 seconds until the LED blinks red.  

Method 2: Remove the camera via the Tapo app

Option 1: Go to the Home page

On the home page, long tap on your camera model card. Then tap Remove at the bottom to remove the camera. The camera will be removed from your TP-Link account and reset to the default settings.

Option 2: Go to Camera Settings page

1. On the home page, tap on your camera model card or tap Camera Preview > Manage to go to Live View page.

2. On the Live View page, tap the gear icon to enter the Camera Settings page.

3. Tap Remove Camera at the bottom to remove the camera from your TP-Link account. The camera will be removed from your account and reset to the default settings.

 If you cannot reset your camera successfully, please try the following steps：

1. Make sure your camera can be powered on.
2. Please do not operate after power-on, wait 10 minutes and try to reset again.

If the issue is still the same, please contact TP-Link technical support.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.